Adhesives
Nino D-200 Waterproof Tile Adhesive
Nino D-200 Waterproof Tile Adhesive is a high-performance resin adhesive in powder form, derived from regular adhesive by mixing distributed high polymer resin, methyl cellulose and waterproof aggregate. It provides excellent adhesion, and is suitable for use on surface with special waterproofing needs.
Product Information
Instructions
- Clean work area surfaces so as not to affect adhesiveness due to debris. If dusts, oil contamination or loose foundation are found, clean or reinforce before application. If the surface is dry, moisturize it before implementation.
- Combine water with adhesive and mix thoroughly with electric mixer. Let sit for 1-3 minutes and mix a second time for easier application, then use toothed trowel to spread into desired thickness.
- Apply light pressure to place the tiles, make their back surfaces fully filled with adhesive and tap lightly with rubber mallet. Nino D-200 waterproof adhesive may take a little longer time, comparing with regular adhesives. Tile holders are suggested for larger-dimension tiles.
- lease simply adjust tile positions with rulers after attaching them.
Precautions
- Avoid breathing in powder while adding water, face masks are recommended.
- If the eyes inadvertently come into contact with the materials, immediately flush the eyes with water./li>
Storage
Product needs to be kept dry, Expiration time: 6 months
Packaging
25± 3% kg / paper bag
Technical Specifications
| Nino D-200 Waterproof Tile Adhesive | |
| Tensile Strength | Over 12 kgf / c㎡ (CNS12611-7 days） |
| Water Absorption | Less than 0.4 (CNS3763) |
| Blended Water | 5~6 kg |
| Time Required | Indoors :3-5 minutes / room Outdoors: 10-15 minutes |
| Unit Consumption | 8-10 ㎡（Thickness 2~3 mm) |
| Applicable Surfaces | RC or cement foundation areas, indoor/ outdoor mosaics, square tiles, wall tiles, ground tiles, rock slabs, rock bricks, or other applications on hard surfaces |
